MARCH TE-5C-MD-AM Magnetic Drive Pump

Perfect for applications including:

The applications of the TE-5C-MD-AM magnetic drive pump include chemical recirculation, chemical transfer, small scrubbers, detergent mixers, and carbon arc furnace cooling.

Excellent for chemicals, including:

The TE-5C-MD-AM pump has pumped acetic acid, citric acid, ethylene glycol, formaldehyde, hydrochloric acid (muriatic), nitric acid, phosphoric acid, potassium chloride, potassium hydroxide, sodium hydroxide (caustic soda), sodium chloride, sulfuric acid, fresh water, salt water, deionized water, and many other chemicals. The TE-5C-MD-AM may have been modified to handle these chemicals. This pump may require modifications to pump liquids with elevated densities, viscosities, or temperatures different than ambient water. Please contact March Pump to review your application before using the TE-5C-MD-AM. Chemical Resistance Chart

Summary paragraph

The March Pump TE-5C-MD-AM industrial magnetic drive centrifugal pump is a seal-less, American-made pump ideal for applications like chemical recirculation and transfer, and scrubbing systems. It is capable of producing a maximum flow rate of 18 gallons per minute at 1 foot of head, and its maximum head lift is 50 feet (21 PSI). The standard wet-end (the parts that come in contact with the solution) is constructed of polypropylene, Viton, and ceramic. The inlet connection is 1-inch female threaded, and the outlet connection is 1/2-inch male threaded. The standard motor is a 1/8 horsepower air motor requiring 60 PSI. The maximum internal pressure the pump can withstand is 50 PSI, and the maximum liquid temperature is 190 degrees Fahrenheit or 87 degrees Celsius. The March TE-5C-MD-AM magnetic drive centrifugal pump is capable of handling low or high corrosive chemicals, acids, and solvents. To determine if the March TE-5C-MD-AM model is suitable for your application, please contact March Pump.

• Extreme wet: Polypropylene (front and rear housing, impeller), Viton (O-ring), ceramic (shaft, thrust washers)
• Maximum internal pressure: 50 PSI / 3.4 bar
• Maximum liquid temperature: 190°F / 87°C
• Note: The product image may differ from the actual product received.