MARCH TE-5K-MD-AC Magnetic Drive Pump

Perfect for applications including:

The applications of the TE-5K-MD-AC magnetic drive pump include chemical recirculation, chemical transfer, chillers, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners.

Excellent for chemicals, including:

The TE-5K-MD-AC pump has pumped acetic acid, citric acid, ethylene glycol, formaldehyde, hydrochloric acid (muriatic), hydrofluoric acid, hydrogen peroxide, nitric acid, phosphoric acid, potassium chloride, sodium chloride, sodium hypochlorite, sulfuric acid, fresh water, salt water, deionized water, and many other chemicals. The TE-5K-MD may have been modified to handle these chemicals. This pump could require modifications to pump liquids with elevated densities, viscosities, or temperatures different than ambient water. Contact March Pump to review your application before using the TE-5K-MD-AC.  Chemical Resistance Chart

Summary paragraph

The March Pump TE-5K-MD-AC industrial pump is a sealless, magnetically driven centrifugal pump made in the USA, ideal for applications such as chemical recirculation and transfer, and scrubbing systems. It is capable of producing a maximum flow rate of 17 GPM at 1 foot of head, and its maximum lift is 27 feet (12 PSI). The standard wetted parts are made of fiberglass reinforced Kynar (PVDF), Viton, and ceramic. The inlet connection is 1 inch FPT, and the outlet connection is 1/2 inch MPT. The standard motor is a 115V or 230V, 0.125 HP, fan-cooled, 1 phase motor that can run at 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can withstand is 75 PSI, and the maximum liquid temperature is 200 degrees Fahrenheit or 93 degrees Celsius. The March TE-5K-MD-AC magnetically driven centrifugal pump is capable of handling low or high corrosive chemicals, acids and solvents. To determine if the March TE-5K-MD-AC is suitable for your application, please contact March Pump.

• Extreme wet: Fiberglass reinforced Kynar (front and rear housing, impeller), Viton (O-ring), ceramic (shaft, thrust washers).
• Maximum internal pressure: 75 PSI / 5.1 bar
• Maximum liquid temperature: 200 °F / 93 °C
• Note: The product image may differ from the actual product received.
• Note: The plastic will be yellow.