MARCH TE-5C-MD-AM with 750 Self Priming Chamber

Perfect for applications including:

The 750 TE-5C-MD-AM self-priming magnetic drive pump applications include chemical recirculation, chemical transfer, rail cars, tank trucks, and small scrubbers.

Excellent for chemicals, including:

The TE-5C-MD-AM 750 self-priming chamber pump has pumped acetic acid, citric acid, ethylene glycol, formaldehyde, hydrochloric acid (muriatic), nitric acid, phosphoric acid, potassium chloride, potassium hydroxide, sodium hydroxide (caustic soda), sodium chloride, sulfuric acid, fresh water, salt water, deionized water, and many other chemicals. The TE-5C-MD-AM 750 self-priming chamber pump may have been modified to handle these chemicals. This pump may need to be modified to pump specific gravities, viscosities, or elevated temperatures different from ambient water. Contact March Pump to review your application before using the TE-5C-MD-AM 750 self-priming chamber pump for any of the chemicals listed above. Chemical Resistance Chart

Summary paragraph

The March Pump TE-5C-MD-AM industrial seal-less magnetic drive centrifugal pump with a 750 self-priming chamber is ideal for applications such as recirculation and chemical transfer, as well as scrubbing systems. It generates a maximum flow rate of 17 GPM at 4 feet of head and a maximum lift elevation of 50 feet (21 PSI). The standard wet end (materials that come into contact with the solution) is made of polypropylene, HDPE, Viton, and ceramic. The inlet connection is 1 inch female thread and the outlet is 1/2 inch male thread. The standard motor is a 0.125 horsepower air motor requiring 60 PSI. The maximum internal pressure the pump can withstand is 25 PSI and the maximum liquid temperature is 130 degrees Fahrenheit or 54 degrees Celsius. The March TE-5C-MD-AM 750 self-priming chamber magnetic drive centrifugal pump is capable of handling low or high corrosive chemicals, acids, and solvents. To determine if the March TE-5C-MD-AM 750 self-priming chamber is right for your application, please contact March Pump.

• Extreme wet: Polypropylene (front and back housing, impeller, filler plug), Viton (O-ring), ceramic (shaft, thrust washers)